Pemisahan Perak dari Limbah Fotorontgen dengan Teknik Membran Cair Berpendukung Menggunakan Pengemban Gabungan TBP dan D2EHPA
DOI:
https://doi.org/10.33394/hjkk.v8i1.2582Keywords:
silver, photorontgen waste, supported liquid membraneAbstract
The photorontgen process produces waste that is harmful to the environment because it contains silver ions that are toxic to living organisms. The silver content in photorontgent waste is 2000 mg / L, while the permissible threshold value for silver in aquatic is 0.1 - 1.0 mg / L, so the disposal of photorontgent waste into the waters will be dangerous. However, silver metal has high economic value so that silver metal separation from x-ray waste is required, in addition to reducing the environmental burden due to silver metal pollution, it is also expected to reuse the silver metal economically. The technique of separation that can be used is a supported liquid membrane (Supported Liquid Membrane, SLM). This technique has the advantage that its separation process is relatively easy because the extraction and stripping process takes place in one stage, the carrying solution as extractant is more stable in the supporting membrane and the amount of extractant required is small. This research studies the effect of waste dilution factors on the effieciency separation of silver from photorontgen waste. Separation was carried out at the optimum SLM condition by using combined carrier compound TBP and D2EHPA with a ratio of 0.25: 0.75, total concentration of 1 M in kerosene and 0.1 M HNO3 as stripping phase. Sample waste was diluted by a factor dilution 25, 50, 75 and 100 times. Measurement of metal content before and after separation is done with AAS. The results showed that the waste dilution factor influenced the efficiency of silver trasnpor through SLM. Percent of silver separation was obtained 21.33% in waste with 100 times dilution.Downloads
Additional Files
Published
How to Cite
Issue
Section
License
License and Publishing Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and publishing agreement.
Copyright
Authors who publish with Hydrogen: Jurnal Kependidikan Kimia agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.Â
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Licensing for Data Publication
Hydrogen: Jurnal Kependidikan Kimia uses a variety of waivers and licenses, that are specifically designed for and appropriate for the treatment of data: Open Data Commons Attribution License, http://www.opendatacommons.org/licenses/by/1.0/ (default) Other data publishing licenses may be allowed as exceptions (subject to approval by the editor on a case-by-case basis) and should be justified with a written statement from the author, which will be published with the article.


